|
Single-Step measurement of Color Transmission Optical Density
The TBX1000C™ Color Transmission Densitometer insures consistent process
control in the manufacture of films, laminates, and substrates. The TBX1000C,
with Status A (Status M on request), measures density and density difference of
either color or black & white substrate with a great degree of accuracy and
precision. Status A is used for reading positives, such as transparencies and
prints. Status M for reading negatives. The unit has the capability of reading
up to three color filters, plus visual. Custom filter sets can be used. The different filters are
easily selected by rotating the knob at the end of the probe. The unit has both
an absolute mode and a relative mode, which can be used for comparing the
measured values to a previously stored value for consistent process control.
Transmission Densitometer/Opacity Meter measures and calculates percent opacity,
percent transmission, and transmission optical density. There is no more need to
figure the percentages manually. The unit has been
designed for user convenience and error-free measurement. The data can be uploaded to a spreadsheet
via the USB port using an optional data transfer program (p/n A2128).
The TBX2000C™ has all the features of the TBX1000C, plus the additional capability to calculate percent opacity.
- Measures density and density difference
- Use for color or black & white substrates
- Soft key menu operation
- 7.5 inch throat to measure large samples
- Accurate repeatable readings
- Software Calibration
- Switchable LED table lamps
- Takes RGB readings using Status A filter set
- Status M and custom filters upon request
- Easy selectable filters
- USB port
- Data capture program available.
|
.jpg)
